Equipment
1 qt Spray Bottle with Trigger Assembly
Sold Out
Use this handy sprayer to keep sanitizing solution ready any time you need it.
1/2 inch NPT Stainless Steel Hex Plug for Kettles
$3.65
1/2 inch NPT Stainless Steel Hex Plug for Kettles
1/4 in FFL x 5/16 in Barb, Swivel Set
Sold Out
1/4 inch female flare (FFL) and 5/16 inch barbed nipple combination set. Use to connect commercial size 5/16 inch ID tubing to a 1/4 inch male flare (MFL) fitting, such...
12"Stainless Steel Torpedo Screen 1/2" NPT
$14.95
This companion product to any kettle valve screws inside the kettle valve to turn any pot into a mash tun or filter out hops. All stainless steel construction, with a...
16 Gram C02 Refill Cartridge for KEG Chargers
$2.75
16 Gram C02 Refill Cartridge for KEG Chargers
2-Way Gas Manifold with 1/4" Inlet and Outlet Barbs
$30.95
2-Way Gas Manifold with 1/4" Inlet and Outlet Barbs
2-Way Gas Manifold with 5/16" Inlet and Outlet Barbs
$30.95
2-Way Gas Manifold with 5/16" Inlet and Outlet Barbs
20-quart Stainless Steel Boiling Pot with lid
Sold Out
This small 5 gallon kettle is a great kettle for the beginning brewer to learn on, as it holds a manageable sized batch and it's available for a very affordable...
25’ Compact Copper Immersion Wort Chiller (3/8"OD)
$107.95
Premium, compact immersion chiller made with 25 feet of 3/8" OD copper tubing. It is intended to chill up to five gallons of hot wort in under twenty minutes. Ships...
3-inch Stainless Steel Hop Steeper with Chain
Sold Out
Mesh ball holds hops while releasing flavor and aroma.
3-Way Gas Manifold with 1/4" Inlet and Outlet Barbs
$42.95
3-Way Gas Manifold with 1/4" Inlet and Outlet
3-Way Gas Manifold with 5/16" Inlet and Outlet Barbs
$42.95
3-Way Gas Manifold with 5/16" Inlet and Outlet
38mm Poly Seal Screw Caps (fits most 1/2 & 1 gallon jugs)
$0.75
For 1/4, 1/2 and 1 gallon jugs. Phenolic plastic with a low density polyethylene liner. BPA free.
38MM Screw Cap with Hole
$0.75
For 1 gallon jugs and cubitainers. Designed for home brewers who like to make smaller batches. Cap with molded hole to accommodate econolock only. This a BPA free product.
4-Way Gas Manifold with 1/4" Inlet and Outlet Barbs
$54.95
4-Way Gas Manifold with 1/4" Inlet and Outlet
4-Way Gas Manifold with 5/16" Inlet and Outlet Barbs
$54.95
4-Way Gas Manifold with 5/16" Inlet and Outlet
45 Bottle Drain Tree
$21.95
Plastic, compact, 18" tall. Accommodates up 45 bottles at a time.
6 Solid Rubber Stopper
$1.00
Pure White Gum Laboratory Stopper - Solid, without drilled hole. 1 1/16" diameter x 1 1/4" tall)
6" Stainless Steel Torpedo Screen 1/2" NPT
$7.95
6" Stainless Steel Torpedo Screen 1/2" NPT
7.8 Gallon Lid - Drilled with Grommet
$9.95
7.8 Gallon Lid - Drilled with Grommet
8 Gallon Brewer's Beast Brewing Kettle with 2 Ports
$164.99
Lid included, tri-clad bottom & induction ready. Top coupler 6" off the bottom, used for thermometer. Bottom coupler 1.5" off the bottom, used for ball valve. Wall thickness: 1.0mm, bottom thickness:...
8 GALLON BREWER'S BEST BASIC BREWING KETTLE W/ TWO PORTS
$98.86
Bottom coupler 1.5" off the bottom, used for ball valve. Top coupler 6" off the bottom, used for thermometer. Graduated volume markers from 1 to 7 gallons. Lid included. Wall...
8 Gallon Brewer's Best Basic Brewing Pot
$57.95
Stainless Steer. Graduated Volume Markers from 1 to 7 gallons. Lid included. Wall and bottom thickness: 0.8mm.
90-Bottle Rotating Draining Bottle Tree
Sold Out
Plastic. Innovative, rotates for easy bottle access.
Aluminum CO2 Cylinder -- Five Pound Capacity
$99.95
Manufactured from high strength aluminum alloy 6061-T6. Service Pressure: 1800 psi / 124 bar Specification: DOT-3AL & TC-3ALM designed. Special Order. Please allow 10 days for fulfillment.
Auto Siphon
$13.72
Single stroke action draws a siphon without disturbing sediment. Precision designed for smooth, leak-free operation. Simple to sanitize, very easy to use. Removable tip prevents siphoning of sediment. Available in:...
Ball Lock Beverage Out - Barb
$6.95
Black, beverage out quick disconnect with barb for beverage line.Barb is 1/4". 3/16" beverage tubing is recommended.Tip N' Trick: Sometimes ball lock fittings are a challenge to quick disconnect "on...
Ball Lock Beverage Out - Flare
$6.95
Black, beverage out quick disconnect with male flare fitting made for Cornelius type kegs. 1/4 inch male flare (MFL) threaded fittings make it easy to connect a variety of hardware...
Ball Lock Gas In - Barb
$6.95
White, gas in quick disconnect with barb for gas line.Barb is 1/4". 1/4" or 5/16" beverage tubing is recommended for gas line.Tip N' Trick: Sometimes ball lock fittings are a...
Ball Lock Gas In - Flare
$6.95
White, gas in quick disconnect with male flare fitting made for Cornelius type kegs. 1/4 inch male flare (MFL) threaded fittings make it easy to connect a variety of hardware...
Ball Lock QD Adjustable Spunding Valve with Pressure Gauge
$39.95
Relieves pressure while filtering from one keg to another while also letting you read the pressure in the receiving keg. Note: The very end of the pressure relief valve can...
Beer Brewing Equipment Kit
$114.95 $127.67
Our Brewing Equipment kit comes with everything you’ll need to get started brewing your own great beer. Introductory Kit includes: 6 Gallon Fermentation Bucket, Grommeted Lid and Airlock, 6 Gallon Bottling Bucket with...
Beer Caps
$4.71
Intermediate size Pry off caps corks 26mm. Excellent reliability and compatibility with the glass ends. Liner : Dry Blend ( PVC Free ). Oxygen Scavenger. Oxygen Barrier. Steel type: TFS and...
Beer Faucet - Chrome: Brass Lever
$30.47
Beer Faucet - Chrome: Brass Lever
Beer Faucet Wrench
$5.37
For installing and removing a faucet from a shank for cleaning.
Big Daddy Dial Thermometer
$12.95
Dial face with easy to read numbers. 12" long probe makes it easy to take temperature reading. Range 0°-220° F.
Blichmann BeerGun™ V2
$105.95
In 2005 the BeerGun® bottle filler revolutionized the way homebrewers bottled their kegged beer. Complicated counter-pressure fillers were obsoleted, and bottling became effortless and enjoyable! The patented BeerGun® bottle filler...
BLUE CAP FOR 6.5 GALLON CARBOY
$4.95
BLUE CAP FOR 6.5 GALLON CARBOY Fits 6.5 gallon carboy. Two spouts which will accommodate racking and blow tubes or fermentation locks.
BLUE CARBOY HANDLE FOR 6.5 GALLON CARBOY
$7.70
Carboy handel for 6.5 gallon carboy
Body Connect Gas-I
$8.95
The post where the ball lock is fitted onto. These are brand new connections. They come with one o-ring and poppet. 19/32" - 18 pitch thread. Fit Cornelius Spartan, Super...
Bottling Spigot
$3.52
For use with bottling bucket with 1" hole and 5/16" or 3/8" siphon hose.
Bottling Wand
$3.35
Can be used with or without a spring, which makes it both a gravity filler and a spring bottle filler. Guaranteed not to leak. The main body can be unassembled...